If you encounter a problem with HERE OTA Connect and the Troubleshooting article doesn’t address it, please contact email@example.com and we’ll do our best to help! To help us diagnose your issue, please provide us with as much information as possible. What follows are some useful artifacts as well as how to retrieve them.
By default, aktualizr writes logs to the systemd logger, which you can read with
journalctl -u aktualizr. If you run aktualizr manually on the commandline, the logging is printed on stdout. The default loglevel is 2 (info). Lower loglevels are more verbose. To change the loglevel, there are two options:
To build a new image with debug logging enabled, add
IMAGE_INSTALL_append = " aktualizr-log-debug "to your
local.confand bitbake a new image. See the meta-updater usage article for more details.
To enable debug logging on a device accessible via the commandline without building a new image, stop the aktualizr service on the device (
systemctl stop aktualizr) and manually start aktualizr on the commandline, e.g.
aktualizr --loglevel 0.
See also the aktualizr configuration options article.
See the debugging tips for more information.
On an active device accessible via the commandline, enter
aktualizr --version. Otherwise, you can examine the aktualizr recipe in meta-updater in your build environment and look for the
SRCREV variable. This recipe will normally be located (relative to your Yocto build directory) at
If you are able to run aktualizr with loglevel 0, the final configuration will be printed to the log when aktualizr starts. See the aktualizr configuration options article for more information.
If you are having problems with Secondaries, please also send us the Secondary JSON configuration file for the Primary (
secondary_config_file) described in the same article.
If you have the Android repo tool available and initialized your build environment with it (such as via the updater-repo), you can run
repo manifest -r to print out all of the layers you are using and the revisions that are checked out.
If Android repo is not available or was not used, please send us your
bblayers.conf file, which normally can be found in the
conf subdirectory of your bitbake build directory. Please also let us know which Yocto release branch you are using.
See the Yocto release branches article for more information.
For problems with bitbaking, please send us your
local.conf file, which normally can be found in the
conf subdirectory of your bitbake build directory.
If you are using aktualizr-secondary and having a problem with it, its logs may be helpful as well. aktualizr-secondary logs in the same way as aktualizr on the Primary, except for the name of the application.